| 释义 |
英语缩略词“PBW”经常作为“Parts By Weight”的缩写来使用，中文表示：“零件重量”。本文将详细介绍英语缩写词PBW所代表英文单词，其对应的中文拼音、详细解释以及在英语中的流行度。此外，还有关于缩略词PBW的分类、应用领域及相关应用示例等。
“PBW”（“零件重量）释义 - 英文缩写词：PBW
- 英文单词：Parts By Weight
- 缩写词中文简要解释：零件重量
- 中文拼音：líng jiàn zhòng liàng
- 缩写词流行度：8989
- 缩写词分类：Miscellaneous
- 缩写词领域：Food & Nutrition
以上为Parts By Weight英文缩略词PBW的中文解释，以及该英文缩写在英语的流行度、分类和应用领域方面的信息。
英文缩略词PBW的扩展资料-
When the content of SiC filler is 80 ~ 160 parts by weight ( based on 100 parts by weight epoxy resin ) the compressive strength has higher values and the bonding strength also has better level.
当碳化硅填料的质量份数在80～160（相对于环氧树脂100份）时，压缩强度达到较高值，粘接强度也保持在较好水平。
-
Before neutralization and swelling, addition of 20 parts of shell monomer by weight, based on 100 parts by weight core-shell polymer improved stability of latex and contrast ratio.
在中和步骤中加入20%的壳单体，可以改善乳液的稳定性，且明显提高乳液的对比率。
-
At room temperature, the solubility of elemental sulfur in such mixed dialkyl disulfides containing 7.1 or 30 parts of diethylamine per 100 parts of mixed dialkyl disulfides by weight exceeds that in traditional sulfur solvent, carbon disulfide.
Ⅰ和二乙胺混合（重量比100∶7.1或100∶30）后，室温溶硫量超过传统的溶硫剂二硫化碳。
-
On the premise of same shrinkage in different directions during sintering, a mathematic model of controlling injected parts dimension and qualities by controlling the weight deviations of injected green parts, which is proved to be correct in the experiment is proposed.
文章基于烧结收缩各向同性的前提下，提出了通过注射坯质量偏差控制注射坯尺寸精度和注射坯质量的数学模型，并在实验中验证了这一模型的正确性。
-
Application range of Powder Injection Moulding advances greatly by replacing the traditional manufacturing process Manufacturers can produce complex metal parts which have bigger wall thickness by use of this technology recently Maximum weight of this metal part is 300g
通过代替传统的生产工艺，粉末注射成型的应用范围得到大大的提高。近年来，已能生产重量最大为300g，壁厚较大的复杂金属制件
上述内容是“Parts By Weight”作为“PBW”的缩写，解释为“零件重量”时的信息，以及英语缩略词PBW所代表的英文单词，其对应的中文拼音、详细解释以及在英语中的流行度和相关分类、应用领域及应用示例等。
|